LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2419 (Wheels & Tires) >> Removal And Installation >> Wheel and Tire >> Removal

Wheel and Tire: Removal

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
    2. NOTE: Do not use heat to loosen a seized wheel nut or damage to the wheel and wheel bearing can occur.
  2. Remove the 5 wheel nuts.
  3. Remove the wheel and tire assembly.
scientia non olet · About LEMON Manuals