LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2409 (Engine Mechanical - 2.5L (Except Hybrid)) >> In-Vehicle Repair >> Camshafts >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL SPECIFICATION

G06181545Courtesy of FORD MOTOR CO.
 Alignment Plate, Camshaft
303-465 (T94P-6256-CH)
G06181808Courtesy of FORD MOTOR CO.
 Timing Peg, Crankshaft TDC
303-507
scientia non olet · About LEMON Manuals