LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2400 (Interior Trim And Ornamentation) >> Removal And Installation >> Scuff Plate Trim Panel - Rear >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift the rear scuff plate trim panel straight up to release the rear scuff plate trim panel from the 2 retaining clips.
    NOTE: The 2 retaining clips must stay attached to the door weather strip and pinch weld.
  2. To install, reverse the removal procedure.
    • Align the rear scuff plate trim panel into the clips and snap into place.
scientia non olet · About LEMON Manuals