LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2377 (Anti-Theft System - Passive Anti-Theft System (Pats) (Except Hybrid)) >> Removal And Installation >> Passive Anti-Theft System (PATS) Transceiver >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 screws and the lower steering column shroud.
  2. Disconnect the electrical connector and remove the Passive Anti-Theft System (PATS) transceiver.
  3. To install, reverse the removal procedure.
    NOTE: Replacement of the PATS  transceiver does not require the PATS  keys to be programmed into the Instrument Panel Cluster (IPC) again.
scientia non olet · About LEMON Manuals