Motor Electronics Pump

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying MECS Coolant Pump Outlet Hose

Courtesy of FORD MOTOR CO.

PART NUMBER REFERENCE TABLE

Item	Part Number	Description
1	14A464	Motor Electronics Cooling System (MECS) coolant pump electrical connector
2	8A567	MECS coolant pump outlet hose
3	15179	MECS coolant pump inlet hose
4	8C419	MECS pump

Drain the Motor Electronics Cooling System (MECS). For additional information, refer to MOTOR ELECTRONICS COOLING SYSTEM DRAINING AND FILLING .
Disconnect the MECS cooling pump electrical connector.

Fig 2: Locating MECS Cooling Pump Electrical Connector
Courtesy of FORD MOTOR CO.
Compress the 2 retainers, remove the MECS pump from the bracket and pull the MECS pump down to gain access to the constant tension clamps that hold the hoses on.

Fig 3: Locating MECS Pump Bracket Retainers
Courtesy of FORD MOTOR CO.
Compress the constant tension clamps and disconnect the inlet and outlet hoses from the MECS pump.

Fig 4: Locating Inlet & Outlet Hoses Clamps
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.