Exhaust Manifold to Exhaust Gas Recirculation (EGR) Valve Tube: Installation
WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Install the exhaust manifold-to-EGR valve tube.
- Hand start the exhaust manifold-to-EGR valve tube fitting to the exhaust manifold.
- Hand start the exhaust manifold-to-EGR valve tube fitting to the EGR valve.
- Tighten the exhaust manifold-to-EGR valve tube fittings to 40 Nm (30 lb-ft).