LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2351 (Seat System - Seats) >> Removal And Installation >> Seat - Front >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL DESCRIPTION TABLE

G06259449Courtesy of FORD MOTOR CO.
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
NOTE: Passenger seat shown, driver seat similar.
NOTE: The seat track-to-floor bolts must be tightened in the sequence described in this procedure.
Fig 1: Exploded View Of Front Seat Components With Torque Specifications
G06259450Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION TABLE

Item Part Number Description
1 621A44 Safety belt retractor belt anchor bolt cover (part of 62184) (passenger only)
2 W505274 Safety belt retractor belt anchor bolt (passenger only)
3 - Safety belt retractor belt anchor (part of 611B08) (passenger only)
4 61748 (passenger)/61749 (driver) Seat-to-floor bolt cover (4 required)
5 W707858 Seat-to-floor bolt (4 required)
6 - Electrical connectors (part of 14A698)
7 - Front seat assembly