LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2330 (Transfer Case - Power Transfer Unit (PTU)) >> In-Vehicle Repair >> Output Shaft Seal >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL REFERENCE TABLE

G06064994Courtesy of FORD MOTOR CO.
 Holding Fixture, Drive Pinion Flange 205-126 (T78P-4851-A)
G06270908Courtesy of FORD MOTOR CO.
 Installer, PTU Drive Gear Outer Oil Seal 308-430
G06064383Courtesy of FORD MOTOR CO.
 Remover, Output Flange 307-523
scientia non olet · About LEMON Manuals