LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2306 (Brake System - General Information) >> General Procedures >> Brake System Inspection >> Brake Booster (Hybrid Vehicles)

Brake Booster (Hybrid Vehicles)

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the brake booster for excessive corrosion or damage. Inspect the vacuum hoses for leaks and kinks.
    • Install a new brake booster if signs of excessive corrosion or damage are found. For additional information, refer to REMOVAL AND INSTALLATION .
    • Repair or replace vacuum hoses as necessary.
  2. Check all electrical connections by wiggling connectors and flexing the wire harnesses.
    • Repair the connectors, terminals or wire harnesses as necessary.
  3. Retrieve any ABS module DTCs. For additional information, refer to DTC TABLES .
scientia non olet · About LEMON Manuals