LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2296 (Automatic Transaxle - AISIN Aw21) >> Diagnosis And Testing >> Diagnosis By Symptom >> Diagnosis by Symptom Table Directions

Diagnosis by Symptom Table Directions

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using DIAGNOSIS BY SYMPTOM INDEX , select the concern/symptom that best describes the condition.
  2. See the routine indicated in DIAGNOSIS BY SYMPTOM INDEX .
  3. Always begin diagnosis of a symptom with:
    1. Preliminary inspections.
    2. Verifications of condition.
    3. Checking the fluid levels.
    4. Carry out other test procedures as directed.
  4. Begin with the routine indicated. Follow the reference or action required statements. Always carry out the On-Board Diagnostic (OBD) tests as required. Never skip steps. Repair as required. These components are listed in the removal sequence and by the most probable cause. All components listed must be inspected to make sure of correct repair.
    NOTE: Not all concerns and conditions with electrical components will set a DTC. Be aware that the components listed may still be the cause. Verify correct function of these components prior to proceeding to the routine listed.
scientia non olet · About LEMON Manuals