LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2295 (Engine Mechanical - 2.5L (Hybrid)) >> In-Vehicle Repair >> Oil Pan >> Removal

Oil Pan: Removal

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Drain the engine oil, then install the drain plug.
    • Tighten to 28 Nm (21 lb-ft).
  3. Remove the engine front cover. For additional information, refer to Removal .
  4. Remove the 4 oil pan-to-bellhousing bolts.
  5. Remove the 13 bolts and the oil pan.
scientia non olet · About LEMON Manuals