LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2289 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P1635: Tire/Axle Ratio Out Of Acceptable Range

DTC P1635: Tire/Axle Ratio Out Of Acceptable Range

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P1635: TIRE/AXLE RATIO OUT OF ACCEPTABLE RANGE

Description:  This DTC indicates the tire and axle information contained in the vehicle identification (VID) block does not match the vehicle hardware.
Possible Causes: 
  • Incorrect tire size
  • Incorrect axle ratio
  • Incorrect VID configuration parameters
Diagnostic Aids:  Using the scan tool, view the tire and axle parameters within the VID. They must match the vehicle hardware.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the appropriate DTC.
scientia non olet · About LEMON Manuals