LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2289 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P1299: Cylinder Head Over Temperature Protection Active

DTC P1299: Cylinder Head Over Temperature Protection Active

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P1299: CYLINDER HEAD OVER TEMPERATURE PROTECTION ACTIVE

Description:  Indicates an engine overheat condition was detected by the cylinder head temperature (CHT) sensor. A failure mode effects management (FMEM) strategy called fail-safe cooling was activated to cool the engine.
Possible Causes: 
  • Engine cooling system concerns
  • Low engine coolant level
  • Base engine concerns
Diagnostic Aids:  Refer to POWERTRAIN CONTROL SOFTWARE , for more information on the fail-safe cooling strategy and CHT sensor.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST DL .