LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2289 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P0297: Vehicle Over Speed Condition

DTC P0297: Vehicle Over Speed Condition

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0297: VEHICLE OVER SPEED CONDITION

Description:  Indicates the vehicle has been operated in a manner which caused the vehicle speed to exceed a calibration limit. The vehicle speed is continuously monitored and evaluated by the powertrain control module (PCM). The DTC is set when the vehicle speed exceeds the calibrated limit set within the PCM. For additional information on the vehicle speed limiter, refer to POWERTRAIN CONTROL SOFTWARE .
Possible Causes: 
  • Vehicle driven at a high rate of speed
Diagnostic Aids:  The DTC indicates the vehicle has been operated in a manner which caused the engine speed to exceed a calibrated limit.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All - - GO to PINPOINT TEST ND .
scientia non olet · About LEMON Manuals