LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2283 (Engine Controls - Powertrain DTC Charts & Descriptions - (Hybrid)) >> DTC Diagnosis >> P0A90 - Drive Motor A Performance

P0A90 - Drive Motor A Performance

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0A90 - DRIVE MOTOR A PERFORMANCE

Description:  This DTC indicates a traction motor concern.
Possible Causes: 
  • Motor resolver
  • Motor resolver/current sensor voltage supply
  • Motor current feedback concern
Diagnostic Aids:  Clear the transaxle control module (TCM) continuous DTCs. Carry out a TCM key ON, engine OFF (KOEO) on demand self-test. If DTC P0A90 is present again, install a new transaxle. Refer to the . If the DTC is not present, concern can not be duplicated or identified at this time. GO to PINPOINT TEST Z for intermittent diagnostics.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All See Note 1 U0418 - INVALID DATA RECEIVED FROM BRAKE SYSTEM CONTROL MODULE  - See Note 4 U0418 - INVALID DATA RECEIVED FROM BRAKE SYSTEM CONTROL MODULE