LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2270 (Instrument Cluster And Panel Illumination) >> Removal And Installation >> Instrument Cluster Bulb >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster. For additional information, refer to INSTRUMENT CLUSTER (IC) AND WARNING CHIMES article.
  2. Remove the instrument cluster illumination bulbs.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals