LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2266 (Parking Brake And Actuation) >> Removal And Installation >> Parking Brake Cable - Front >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the parking brake control. For additional information, refer to Parking Brake Control .
  2. Disconnect the front parking brake cable from the intermediate parking brake cable at the cable union.
  3. Compress the tabs and disconnect the front parking brake cable conduit from the frame bracket.
  4. Remove the front parking brake cable.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals