LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2260 (Rear Disc Brake System) >> Removal And Installation >> Rear Brake Caliper Support Bracket >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the parking brake shoes. For additional information, refer to PARKING BRAKE AND ACTUATION article.
  2. Disconnect the parking brake cable and conduit.
  3. Remove the 4 brake caliper support bracket bolts.
    • To install, tighten to 175 Nm (129 lb-ft).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals