LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2250 (Starting System - Diesel Engine) >> Diagnostic Tests >> Starting System >> Pinpoint Tests >> Pinpoint Test C: Unusual Starter Noise >> Pinpoint Test C: Unusual Starter Noise

Pinpoint Test C: Unusual Starter Noise

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. C1 CHECK THE STARTER MOTOR MOUNTING 
    • Inspect the starter motor mounting brackets for cracks.
    • Check the starter motor mounting bolts for looseness.
    • Is the starter motor mounted correctly? 
    1. YES  : Go to  C2.
    2. NO  : REINSTALL the starter motor correctly.
  2. C2 INSPECT THE STARTER MOTOR 
    • Remove the starter motor.
    • Inspect the starter motor for damage.
    • Is the starter motor damaged? 
    1. YES  : INSTALL a new starter motor. TEST the system for normal operation.
    2. NO  : CHECK the starter drive. REFER to Component Tests , Starter Motor - Drive Pinion Test. INSTALL a new starter motor. TEST the system for normal operation.