LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2246 (Engine - 6.0L (99P E-Series) Diesel) >> In-Vehicle Servicing >> Exhaust Manifold - LH >> Removal

Exhaust Manifold - LH: Removal

WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the engine cover. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
  3. Prior to removing the exhaust manifold, inspect the exhaust manifold for warpage with a feeler gauge between the manifold and the cylinder head. Record the measurement and compare with the specifications.
  4. Remove the 2 LH exhaust manifold-to-turbocharger adapter pipe nuts.
    • Discard the nuts.
  5. Disconnect the Exhaust Pressure (EP) tube from the LH exhaust manifold.
  6. Remove the 8 bolts, 8 spacers and the LH exhaust manifold.
    • Discard the bolts.
scientia non olet · About LEMON Manuals