LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2241 (Automatic Transmission - 4R70E/W, 4R75E/W) >> In-Vehicle Servicing >> Overdrive Servo >> Installation

Overdrive Servo: Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the overdrive servo piston assembly.
    1. Install the overdrive servo piston return spring.
    2. Install the overdrive servo piston assembly.
    2. Fig 1: Installing Overdrive Servo Piston Assembly
    GF0003532Courtesy of FORD MOTOR CO.
  2. Use the special tool to install the overdrive servo piston retaining ring.
    3. Fig 2: Locating Overdrive Servo Piston Retaining Ring
    GF0003530Courtesy of FORD MOTOR CO.
  3. Install the main control valve body. For additional information, refer to Main Control Valve Body .
scientia non olet · About LEMON Manuals