LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2241 (Automatic Transmission - 4R70E/W, 4R75E/W) >> Disassembly And Assembly Of Subassemblies >> Intermediate One-Way Clutch >> Disassembly

Intermediate One-Way Clutch: Disassembly

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: One tab that locks the reverse clutch drum into the reverse sun shell may be removed. This is done for balancing purposes.
  1. Remove the intermediate one-way clutch.
    1. Remove the snap ring.
    2. Remove the intermediate one-way clutch.
    2. Fig 1: Identifying Intermediate One-Way Clutch And Snap Ring
    GF0003617Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals