LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2239 (Fuel Charging And Controls - 4.6L (2V) And 5.4L (2V)) >> Removal And Installation >> Fuel Rail and Fuel Injector - Exploded View, 4.6L

Fuel Rail and Fuel Injector - Exploded View, 4.6L

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: EGR, PCV and Crankcase Vent Tube Connections
GF0011945Courtesy of FORD MOTOR CO.
Item Part Number Description
1 6K817 PCV tube
2 - Crankcase ventilation tube
3 9D477 EGR system tube
Fig 2: Coolant Hose and Electrical Connectors
GF0044594Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Electronic throttle body (TB) electrical connector (part of 12B637)
2 - Fuel rail pressure and temperature sensor electrical connector (part of 12B637)
3 - Fuel rail pressure and temperature vacuum connector (part of 9E498)
4 18465 Heated PCV coolant hose
Fig 3: Exploded View Of Fuel Rail & Fuel Injectors With Torque Specification
GF0044595Courtesy of FORD MOTOR CO.
Item Part Number Description
1 N804394 Fuel rail stud bolt (4 required)
2 9F472 Fuel rail
3 - Fuel injector-to-fuel rail O-ring seal (8 required)
4 9F593 Fuel injector (8 required)
5 - Fuel injector-to-intake manifold O-ring seal (8 required)
  1. For additional information, refer to the procedures.