LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2213 (Exterior Lighting System) >> Removal And Installation >> High Mounted Stoplamp >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

High mounted stoplamp with attached cargo lamp 

  1. Remove the 2 screws and the cargo lamp lens.
  2. Remove the 2 screws and position the cargo lamp assembly aside.
    • Remove the 2 bulb sockets from the high mounted stoplamp assembly.
  3. Remove the 2 screws and the high mounted stoplamp assembly.

    4. High mounted stoplamp without attached cargo lamp 

  4. Remove the 2 screws and the high mounted stoplamp.
    • Disconnect the electrical connectors.

    5. All vehicles 

  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals