LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2210 (Glass, Frames And Mechanisms) >> Diagnostic Tests >> Glass, Frames and Mechanisms >> Pinpoint Tests >> Pinpoint Test C: A Single Power Window is Inoperative - RH >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The RH front window control switch receives power from the central junction box (CJB) through circuit 170 (RD/LB) and is grounded through the LH front window control switch. When the RH front window control switch is pressed to the up position, battery voltage is sent to the RH front window regulator motor through circuit 334 (RD/YE) and ground through circuit 333 (YE/RD). The window regulator motor will move the window glass up. When the RH front window control switch is pressed to the down position, battery voltage is sent to the LH front window regulator motor through circuit 333 (YE/RD) and ground through circuit 334 (RD/YE). The window regulator motor will move the window glass down.

scientia non olet · About LEMON Manuals