LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2210 (Glass, Frames And Mechanisms) >> Diagnostic Tests >> Glass, Frames and Mechanisms >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of mechanical or electrical damage.
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Window alignment
    • Window mounting (regulator and bracket)
    • Window frame interference
    • Battery junction box (BJB) fuse 7 (60A)
    • Central junction box (CJB) circuit breaker 42 (20A)
    • CJB fuse 22 (15A)
    • Accessory delay relay
    • Damage to wiring harness
    • Loose or corroded connections
    • Damaged switches
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the fault is not visually evident, determine the symptom. Go to Symptom Chart .