LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Wheel Alignment Specifications & Adjustment Procedures - Specifications & Procedures -- Trucks) >> Riding Height >> Adjustments >> Except Econoline, Excursion & F250/F350 Super Duty

Except Econoline, Excursion & F250/F350 Super Duty

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2001 Mercury Villager, 2001 Mercury Mountaineer, 2001 Lincoln Navigator, 2001 Ford Windstar, and 2001 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Adjust riding height by turning torsion bar adjustment bolt. Tighten torsion bar adjusting bolt to raise height. Loosen torsion bar adjusting bolt to lower height. On rear of vehicle, repair or replace worn or damaged components.

scientia non olet · About LEMON Manuals