LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2178 (Parking Brake System And Actuation) >> Diagnostic Tests >> Parking Brake >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect the following mechanical and electrical components:
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Parking brake control release handle
    • Parking brake control
    • Front parking brake cable
    • Front parking brake cable conduit
    • LR parking brake cable and conduit
    • RR parking brake cable and conduit
    • Parking brake shoes and hardware (hybrid vehicles)
    • Brake shoes and hardware (non-hybrid vehicles)
    • Wiring, terminals and connectors
    • Parking brake switch
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, verify the symptom and Go to Symptom Chart .