Coolant Pump - 3.0L (4V): Notes
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Installer, Camshaft Pulley | 303-458 (T94P-6312-AH3), part of 303-S455 | |
| Installer, Power Steering Pump Pulley (Nut only) | 211-185 (T91P-3A733-A) | |
| Plate, Water Pump Pulley | 303-456 (T94P-6312-AH1), part of 303-S455 | |
| Protector, Water Pump Shaft | 303-457 (T94P-6312-AH2), part of 303-S455 | |
| Remover, Crankshaft Vibration Damper | 303-009 (T58P-6316-D) | |
| Spacer, Water Pump Pulley | 303-459 (T94P-6312-AH4), part of 303-S455 |
| Item | Part Number | Description |
|---|---|---|
| 1 | W525958 | Heater hose clamp |
| 2 | 6N734 | Heater hose |
| 3 | W701544 | Coolant pump assembly bolt (3 required) |
| 4 | 8287 | Coolant pump-to-engine hose clamp |
| 5 | 8A577 | Coolant pump-to-engine hose |
| 6 | 8287 | Coolant pump-to-thermostat housing hose clamp |
| 7 | 8501 | Coolant pump assembly |
| 8 | 6A359 | Coolant pump drive pulley |