LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2123 (Seat System) >> Diagnostic Tests >> Seats >> Pinpoint Tests >> Pinpoint Test A: The Power Seat is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The seat control switch is powered by battery voltage through circuit SBB19 (BU/RD) and is grounded by circuit GD182 (BK/GY). The seat control switch then routes power and ground to the appropriate circuits to operate the seat motors.

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals