Rear Ride Height Measurement
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Ride height = B - A |
| 2 | - | Measurement A |
| 3 | - | Measurement B |
NOTE:
Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full tank of fuel.
- Measure the distance between the flat level surface and the center of the shock absorber lower bolt (measurement A).
- Measure the distance between the flat level surface and the center of the lower arm inner bolt (measurement B).
- Subtract measurement B from measurement A to obtain the rear ride height (C).
- Refer to SPECIFICATIONS .