LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2090 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P2096 - Post Catalyst Fuel Trim System Too Lean Bank 1

P2096 - Post Catalyst Fuel Trim System Too Lean Bank 1

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2008 Mercury Sable, 2008 Mercury Mountaineer, 2008 Mercury Milan, 2008 Mercury Mariner, and 2008 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P2096 - POST CATALYST FUEL TRIM SYSTEM TOO LEAN BANK 1

Description:  The powertrain control module (PCM) monitors the correction value from downstream heated oxygen sensor (HO2S) as part of the fore-aft oxygen sensor control routine. The test fails when the correction value is greater than a calibrated limit.
Possible Causes: 
  • Loose connection, and damaged or corroded terminals
  • Exhaust leaks
  • Contaminated HO2S
Diagnostic Aids:  Inspect the connectors for signs of damage, water ingress, or corrosion.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   - - refer to PINPOINT TEST DZ .
scientia non olet · About LEMON Manuals