LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2090 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P0315 - Crankshaft Position System Variation Not Learned.

P0315 - Crankshaft Position System Variation Not Learned.

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2008 Mercury Sable, 2008 Mercury Mountaineer, 2008 Mercury Milan, 2008 Mercury Mariner, and 2008 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0315 - CRANKSHAFT POSITION SYSTEM VARIATION NOT LEARNED.

Description:  The powertrain control module (PCM) is unable to learn and correct for mechanical inaccuracies in crankshaft pulse wheel tooth spacing. This DTC disables the misfire monitor.
Possible Causes: 
  • Damaged crankshaft pulse wheel teeth
  • Damaged crankshaft position (CKP) sensor
Diagnostic Aids:  Requires visual inspection of the CKP sensor and the crankshaft pulse wheel teeth for damage.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   - - refer to PINPOINT TEST HD .
scientia non olet · About LEMON Manuals