Removal & Installation
WARNING: This page is about a different car, the 2003 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disconnect negative battery cable. Using Radio Removing Tool (415-001/T87P-19061-A), pull out audio unit from instrument panel. Disconnect electrical connectors and remove audio unit.
- Remove 2 screws and pull out center instrument panel finish panel assembly and disconnect electrical connectors. Remove screw, disconnect 4 electrical connectors and remove GEM from vehicle. To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .