Removal & Installation
WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Remove the radiator. Loosen the clamps and remove inlet and outlet ducts from charge air cooler. Remove 2 charge air cooler stud bolts and remove charge air cooler. See Fig 1. To install, reverse removal procedure. Tighten charge air cooler stud bolts to specification. See TORQUE SPECIFICATIONS .