LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2011 (Automatic Transmission - (Hybrid)) >> In-Vehicle Servicing >> Transmission Insulator and Retainer - Upper >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner assembly.
  2. Install the special tools.
    3. Fig 1: Special Tools
    GF0024817Courtesy of FORD MOTOR CO.
  3. Remove the bolts and the bracket.
    • To install, tighten to 25 Nm (18 lb-ft).
    4. Fig 2: Rear Transaxle Mount Brace & Bolts
    GF0024405Courtesy of FORD MOTOR CO.
  4. Remove the nuts, bolt and the insulator.
    • To install, tighten the nuts to 90 Nm (66 lb-ft).
    • To install, tighten the bolt to 90 Nm (66 lb-ft).
    5. Fig 3: Insulator & Fasteners
    GF0025212Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals