LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1989 (Engine - 2.3L - (Except Hybrid)) >> In-Vehicle Servicing >> Flexplate >> Removal

In-Vehicle Servicing: Flexplate: Removal

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the automatic transaxle. For additional information, refer to AUTOMATIC TRANSAXLE/TRANSMISSION - CD4E article.
  3. Remove the 6 bolts and the flexplate.
scientia non olet · About LEMON Manuals