LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1975 (Engine Controls - Powertrain DTC Charts And Descriptions - (Hybrid)) >> DTC Diagnosis >> P1635 (TCM) - Tire/Axle Out Of Acceptable Range

P1635 (TCM) - Tire/Axle Out Of Acceptable Range

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P1635 (TCM) - TIRE/AXLE OUT OF ACCEPTABLE RANGE

Description:  The TCM continuously monitors the CAN network for a revolutions per mile message from the PCM. This DTC is set when the TCM fails to receive the message within a defined time period, or when the message received is out of expected range. When this DTC is set the active motor damping is disabled.
Possible Causes: 
  • Incorrect tire size or gear ratio constants in the PCM
  • Incorrect VID configuration parameters
  • Damaged CAN bus circuit
Diagnostic Aids:  Using the scan tool, view the tire and axle parameters within the VID. They must match the vehicle hardware.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   refer to PINPOINT TEST TG . - refer to PINPOINT TEST TG .
scientia non olet · About LEMON Manuals