LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1952 (Engine Emission Control System - F250-F550) >> Removal And Installation >> Positive Crankcase Ventilation (PCV) Heater Element - 5.4L >> Removal

Positive Crankcase Ventilation (PCV) Heater Element - 5.4L: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
  2. Disconnect the positive crankcase ventilation (PCV) heater element electrical connector.
  3. Disconnect the quick connect couplings and remove the PCV tube. For additional information refer to FUEL SYSTEM - GENERAL INFORMATION - GASOLINE AND DIESEL article.
  4. Remove the bolts and the PCV heater element.
    • Discard the O-ring seal.
scientia non olet · About LEMON Manuals