LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1939 (Charging System (Battery, Mounting And Cables) - F250-F550) >> Removal And Installation >> Battery Tray - Diesel

Battery Tray - Diesel

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the auxiliary battery. For additional information, refer to Battery - Diesel  in this article.
  2. Remove the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING article.
  3. Remove the 4 bolts and remove the battery tray.
    • To install, tighten to 18 Nm (13 lb-ft).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals