Vehicles with tilt column

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Install the large steering column bearing so that the inner race is visible when installed.

NOTE: Use an appropriate bearing installer or socket.

Fig 1: Identifying Steering Column Lower Bearing

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	-	Bearing slot
2	3511	Steering column lock cylinder housing
3	-	Outer race
4	-	Bearing (in the UP position)
5	-	Ball
6	-	Inner race

Install the steering column lower bearing into the steering column lock cylinder housing.

Fig 2: Installing Steering Column Bearing In Steering Column Lock Cylinder Housing

Courtesy of FORD MOTOR CO.

Install the sensor ring.
- Install the sensor ring.
- Install the steering column lower bearing spring.
Fig 1: Installing Sensor Ring
Courtesy of FORD MOTOR CO.