LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1913 (Clutch System -- F250-F550 Super Duty) >> Removal And Installation >> Pilot Bearing >> Installation >> Diesel engines

Diesel engines

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The new transmission input shaft pilot bearing is pregreased and does not require additional lubrication.
  1. Using a soft-face hammer and a suitable driver, install the new input shaft pilot bearing.
  2. Install the clutch disc and pressure plate. For additional information, refer to the procedure in this article.
scientia non olet · About LEMON Manuals