LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1907 (Climate Control - F250-F550) >> Removal And Installation >> Climate Control Assembly >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
    2. NOTE: Manual climate controls shown, EATC similar.
    Fig 1: Locating Climate Control Screws
    GF0008049Courtesy of FORD MOTOR CO.
  2. Remove the screws and the climate control assembly.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals