LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1904 (Engine - 5.4L (3V) - F250 & F350) >> In-Vehicle Servicing >> Oil Pump >> Removal

Oil Pump: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the timing drive components. For additional information, refer to Timing Drive Components  in this article.
  2. Remove the oil pan. For additional information, refer to Oil Pan  in this article.
  3. Remove the 3 bolts and the oil pump.
    Fig 1: Locating Oil Pump Bolts
    G04638972Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals