LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1901 (Engine Cooling System - F250-F550) >> General Procedures >> Cooling System Draining, Filling and Bleeding >> Filling and Bleeding with RADKITPLUS

Filling and Bleeding with RADKITPLUS

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: With the engine cold, fill vehicles to within the cold fill range shown on the degas bottle. This fill level will allow for coolant expansion. Overfilling the degas bottle may result in damage to the pressure cap, which can cause the engine to overheat.
  1. Using the special tool, install the RADKITPLUS and follow the RADKITPLUS manufacturer's instructions to fill and bleed the cooling system.
scientia non olet · About LEMON Manuals