LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Computer Relearn Procedures) >> General Motors (Trucks & Vans) >> Blazer, BRAVADA, Envoy, Jimmy, Pickup & SONOMA >> BCM Programming

BCM Programming

WARNING: This page does not describe the selected car, but rather 98 other vehicles, including the 2001 Saturn SW2, 2001 Saturn SL2, 2001 Saturn SL1, 2001 Saturn SL, and 2001 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.

This procedure requires Techline® terminal and equipment. Ensure battery is fully charged. Ensure battery and lighter connectors are secure. Ensure DLC is accessible. Turn ignition switch to ON position. Refer to Techline® terminal and equipment user's instructions.

If BCM fails to program, check all BCM connections, check Techline® terminal and equipment for latest software version. Retry programming. If BCM fails to program again, replace BCM. See appropriate BODY CONTROL MODULES article in ACCESSORIES & EQUIPMENT. Clear DTCs after programming.

scientia non olet · About LEMON Manuals