LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1890 (Driveshaft -- F250-F550 Super Duty) >> Removal And Installation >> Driveshaft - Rear, One-Piece, Rear Wheel Drive (RWD) >> Removal >> Vehicles with transmission slip yokes

Vehicles with transmission slip yokes

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Do not allow the output shaft to rotate while moving the driveshaft rearward.
  1. Lower the driveshaft and slide it rearward off the transmission output shaft.
scientia non olet · About LEMON Manuals