LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1884 (Rear Disc Brake System -- F250-F550 Super Duty) >> Removal And Installation >> Rear Disc Brake >> Removal And Installation >> Single rear wheel brake disc

Single rear wheel brake disc

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Do not allow the brake caliper to hang from the brake hose or damage to the hose can occur.
  1. Remove the anchor plate bolts and position the brake caliper and anchor plate assembly aside.
    • Support the caliper and anchor plate using mechanic's wire.
    • To install, tighten to 275 Nm (203 lb-ft).
  2. Separate the brake disc from the hub.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals