Evaporative Emission (EVAP) System Components - Exploded View
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Intake manifold-to-evaporative emission (EVAP) canister purge valve fuel vapor tube quick connect coupling (part of 9D289) |
| 2 | - | Fuel tank-to-EVAP canister purge valve fuel vapor tube quick connect coupling (part of 9D676) |
| 3 | - | EVAP canister purge valve electrical connector (part of 12B637) |
| 4 | 9C915 | EVAP canister purge valve |
| Item | Part Number | Description |
|---|---|---|
| 5 | 9C016 | Fuel vapor tube quick connect coupling (part of 9C016) |
| 6 | 9G297 | Fuel vapor hose |
| 7 | W500224 | EVAP canister assembly bracket bolts (2 required) |
| 8 | - | EVAP canister vent solenoid harness pushpin retainer |
| 9 | - | EVAP canister vent solenoid electrical connector (part of 14405) |
| 10 | W505274 | EVAP canister assembly bracket bolts (2 required) |
| 11 | W500224 | EVAP canister assembly bracket bolts (2 required) |
| 12 | 9D653 | EVAP canister assembly |
| Item | Part Number | Description |
|---|---|---|
| 13 | - | EVAP canister heat shield (part of 9D653) |
| 14 | 9F675 | EVAP filter assembly tube (empty housing) |
| 15 | 9D653 | EVAP canister |
- For additional information, refer to the procedures in this article.