LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1852 (Warning System - F-150 & Mark LT) >> Diagnostic Tests >> Warning Devices >> Principles of Operation >> Safety Belt Warning Chime

Safety Belt Warning Chime

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The safety belt warning chime warns the driver safety belt is not fastened. The safety belt warning chime sounds when the driver safety belt is not fastened and when the ignition lock cylinder is turned from the OFF/LOCK or ACC to the ON or START position. The safety belt warning chime stops sounding if any of the following conditions is met:

The safety belt warning chime inputs are the: